The series thermal relay has three shell frame of 25A、36A、93A, current specification 1A~93A.
- A full range of thermal relay can be installed vertically. After installation, the slope does not exceed 5 degrees.
- The relay can meet the requirements of below 2000 meters above sea level;
- Ambient air temperature compensation
- Motion flexibility detection mechanism
- With manual reset or auto reset function
- With test button ,manually disconnect the normally closed contact
- Regular working conditions
Ambient temperature is not higher than 40 ℃ and not less than -5 ℃ .The average value of 24h is less than 35 ℃
Elevation 2000m and below, More than 2000m need to be modified to use
The air relative humidity at the installation site shall be no more than 50% at the maximum temperature of +40 degrees celsius and can have a higher relative humidity at a lower
temperature,for example air relative humidity can reach up to 90% under 20 degrees celsius.Special measures should be taken when changing temperature produces condensation.
Pollution level is 3.
Protection level is IP20
Release level is 10A
The circuit breaker shall be installed in a place where there is no danger of explosion and no conductive dust, no corrosion of metal
The circuit breaker should be installed in the absence of rain and snow
| Model | HSJR1-25 | HSJR1-36 | HSJR1-93 | |
| Rated current A | 1-1.6A/1.6-2.5A/2.5-4A/4-6A/5.5-8A/7-10A/9-13A/12-18A/17-25A | 23-32A/28-36A | 30-40A/37-50A/48-65A/55-70A/63-80A/80-93A | |
| Pole | 3 | |||
| Rated insulation voltage V | 690 | |||
| Rated impulse withstand voltage ?V | 6000 | |||
| Rated operating voltage V | 690 | |||
| Release level | 10A | |||
| Outline dimension ?( Width * height * depth) | Three pole | 67×44×92.5 | 77×54.5×92.5 | 80×70×117 |
